01-Risers
Risers are the primary building components. All standard configurations have male & female threads except "Blanks" with only male threads. Risers lift, offset and support other fixturing components or the measured part. Risers are available in two hex sizes and three lengths.
02-Towers
Towers are rectangular components with threaded holes in various orientations. These stack, lift and support using Group 06 Connectors to secure the assembly.
03-Wall Modules
Walls lift and orient with holes generally parallel to the Group 04 Base Platforms. Like all components there's no absolute methodology for use and construction.
04-Base Platforms
The S37 Base Platform is 3" x 6" x .375". With S75 Platform Extenders and adapters multiple S37 Platforms are connected to build larger base assemblies. With adjustable adapters multiple Platforms can be secured in any orientation on S75 Platforms.
05-Clamp Modules
Clamps are steel with a variety of styles available. The primary "hook" style is normally used with a compression spring providing the clamping force but these can also be used with a tightened bolt for the force.
06-Connectors
Most connectors are standard out-of-the-box varieties. The S37 System uses SAE #10-32 threads, standard Dowels and a few #4-40 threads.
07-Location Pads
Locators are the final component that touches the measured part. Omni Structures' Locators are hardened steel in various heights and profiles.
08-Angles
The Omni Structures' V-Blocks are split into two pieces allowing wide spacing for larger measured parts. As necessary, Location Pads are used for the contact surface and Spacers can be used to adjust to the required size.
09-Bridge Modules
The Bridge is used to span open spaces.
10-Accessories
Accessories include hand tools, tool boxes and instruction documents.
