Omni XTR: Overview

The XTR system is comprised of extruded tubes cut to length and then used to build frames, walls and many other large, heavy duty fixturing structures. Included in the XTR System are Caps and Base Plates, Slides and Connection Hardware.

XTR has many uses. It can be a simple large Riser or Bridge to support S75 components or perhaps a frame to hold multiple S75 Platforms. It’s been a portable table for shop floor inspection when combined with an “arm” style measuring machine. XTR has been assembled as a support wall and horizontal base to secure an assembly of Reference Plates. XTR tubes are also the primary riser between XTR Bases and Caps.





Omni XTR: Applications

Omni’s XTR System is the “erector set” of our fixturing products.  It lifts, holds, spans and frames whatever you need to hold.  It is applicable to a variety of parts sized at approximately 12” square or larger.  This might be an intake manifold, a file cabinet, auto body or airplane.  It can be the fixture, components of the fixture or hold the fixture.

The photos are a beginning, let your imagination soar.





Omni XTR: Sets

At this time there are no preconfigured XTR Sets. There are many potential combinations and for most customers the greatest benefit will be to configure a system specific to the needs.

Please call to discuss your applications.


The transportable table shown below packs into two cases (approx. 51"x14"x5", 75# each).  The table is 48" x 24" x 30" or 36" high.   The side table is designed to hold an "arm" style measuring machine that can be positioned anywhere along any side.  The top will hold multiple 6"x12" Base Platforms.  The table system is just one example of what might be considered an Omni XTR Set.





Omni XTR: Components

The primary XTR components are Bases, Caps and Tubes (listed below).  The next group is connectors; these are the pieces that hold everything together.  The last group adds slides, feet, angles, gussets, adjustment pieces and other accessories that facilitate constructions.  The groups will be formalized at a later time.  Please call to discuss your application or additional information.

 XTR Bases
 3" x 6" 6" x 6" 9" x 9" 6" x 12"  
 XTR Caps
 3" x 3" 3" x 6" 6" x 6" 9" x 9"  6" x 12"
 XTR Tubes — Lengths are available to approx. 20'
 1.5" x 1.5" 1.5" x 3" 1.5" x 4.5" 3" x 3"  3" x 6"